Poston teaches you how to buy rubber boats, assault boats

With the rapid development of water sports, many people's demand for rubber boats is also growing, but there are many kinds of rubber boats on the market, and the price is uneven, many layman friends simply can not start, so for the majority of people to make some detailed introduction.

First of all, the civilian rubber boats of the market manufacturers are made of PVC, and the price ranges from several hundred to several thousand. But all in all, the difference in product price is mainly due to the difference in PVC special motor boat cloth caused by the price is different, its thickness from 0.45cm to 1.2mm can be used as the rubber boat production raw materials, the production of rubber boat thickness standard is 0.9mm, both sides of the PVC coating, the middle is to strengthen the base cloth, tensile strength ≥1100D, According to different customers, it can be adjusted to 1.2mm, and the bottom of the ship is equipped with anti-wear strips, and the inflating part can be divided into multiple air chambers, which can ensure the hull's performance to a maximum extent. The important point is that the rubber boat is not good or bad by saying, nor by looking at how beautiful the website is and how large the company is, but by the quality certification issued by the monitoring agency. Has including CE, stability, anti-sinking, wind and wave resistance, tear strength, environmental protection and other 6 technical parameters of the certification certificate.

Secondly, let's talk about rubber boats here. At present, China's domestic rubber boats are made of thick rubber, which has a high degree of durability, sun protection, corrosion resistance and scratch resistance. However, the defects are also extremely obvious, because the thickness of the rubber is large, the whole ship is extremely heavy, after hanging the ship, the handling is extremely inconvenient, affecting the characteristics of the rubber boat itself - the characteristics of strong mobility, and it is difficult to repair after damage. The imported raw material - HYPALON, belongs to a kind of rubber, with rubber coating on both sides and reinforced base cloth in the middle. The thickness is only 1.1mm. In addition to the characteristics of rubber, the maneuverability is also very strong, which meets the characteristics requirements of rubber boats and is easy to repair. Has been for domestic and foreign large military and political institutions to supply rubber boats, flood prevention rubber boats, but the price of this boat is relatively high, it is recommended to consider PVC rubber boats. Once again, it is recommended that travelers buy rubber boats, need to pay attention to beware of shoplifting and PVC rubber boats posing as rubber boats.

The selection of outboard engine (motor) is introduced. At present, the outboard machines on the market are roughly divided into two categories, one is domestic, the other is imported. The two kinds of outboard machines have their own advantages, and the company only serves as a recommended reference. First of all, the rubber boat is suitable for the outboard machine should be short axis, short axis motor draft shallow, fast, when the wave, the whole boat can take off from the water, imagine the speed and passion. The domestic motor price is relatively cheap, but the quality is general. Imported motor price is higher, but the quality is better, the current domestic imported motor is mainly Yamaha, other including Suzuki, Mercury, Dongfa and so on. And the 2-stroke motor is cheap, relatively. However, the 4-punch motor does not use mixed oil, environmental protection, low noise and other advantages, but also more and more popular among Chinese people. The outboard machine with large horsepower needs to add a steering wheel, that is, the front operation motor that we often say, needs another operating system and bridge, which is equivalent to the car with automatic transmission, feeling more comfortable and convenient than the outboard machine after operation!